High speed disperser with clamping

High speed disperser with clamping
 Application
It can be used in industry of paints, coatings, cosmetics, food, resins, inks, adhesives, latex, medicine, oil, pesticides, daily chemical products, and related fields.
 Working principle
High-speed Disperser is to dissolve, disperse and mix materials with different viscosity. Through the very high peripheral tip speed of the toothed disc, the strong shearing, crashing and friction forces generated between the materials and toothed disc disperse, dissolve and mix the materials efficiently. The large stress forces break down the agglomerates into the liquid or paste suspension.

 Introduction

High speed disperser with clampingMain characteristic

1.        Little air absorption during mixing and dispersing process.

2.        It disperses and dissolves materials to smaller particle size efficiently。

3.        No dead corner during mixing. Easy to clean, wide capacity range, various speed control,

4.        Stable operation, low noise and long-time continuous operation。

5.        This kind of disperser is with clamping for fixing the containers. It is easy operation and convenient. It is safer and more reliable than general High-speed Disperser.

6.        With Floor type and Bench type。

7.        Floor-type designed for mobile containers

8.        Bench-type designed for fixed containers1-4 containers equipped

9.        Explosion-proof motor for oil based materials, frequency controlled for the water-based,

10.    Remote operation

11.    Single-axis disperser matches with low-power motor; and High-power with two-axis.

Power Supply:380V, 50/60Hz (Can be customized)

Speed Adjustment:Frequency Converter

Material:The part contacting with materials is SS304 or SS316L.

Height adjustment:Hydraulic Lifting

Clamping:Belt clamping, Manual rotation clamping, Pneumatic clamping, Electrical clamping.(Can be customized)

Reference Parameter

Models

Power

(kw)

Speed

(rpm)

Capacity

   (L)

Dispersed

    Diameter  

      (mm)

Lifting Stroke

(mm)

Weight

   (kg)

YT-HDC -1.5

1.5

0-1450

≤50

150

550

120

YT-HDC  -4

4

0-1450

≤200

200

800

400

YT-HDC  -7.5

7.5

0-1450

≤400

230

900

600

YT-HDC  -11

11

0-1450

≤500

250

900

650

YT-HDC  -15

15

0-1450

≤700

280

900

700

YT-HDC  18.5

18.5

0-1450

≤800

300

1100

1000

YT-HDC  -22

22

0-1450

≤1000

350

1100

1200

YT-HDC  -30

30

0-1450

≤1500

400

1100

1400

 Notice
* The above listed Max. processing capacity is calculated as per water as medium. The model selection should depend on the comprehensive factors such as materials viscosity, specific gravity etc. * If works under special environment such as high temperature, high pressure, explosive, combustible, corrosive etc, correct data is required for correct model selection. *The above data and picture is subject to change without notice. The accurate parameter should be subject to the object. *Not all products are listed. For more, please contact with our sales engineer.
Inquiry:(If immediate response needed, please call (86-28-62812181) or send e-mail to kf@fsyhfz.com)
Name 
Tel 
Content 
ValidCode  Refresh


Home | About Us | Products | Solutions | Contact | SiteMap
©1993-2010 fsyhfz.com
重庆龙虎微信群 上海11选5 智慧彩票投注 千禧彩票手机app下载 159彩票 极速飞艇 吉林快3计划 内蒙古11选5走势图 澳洲幸运10开奖结果 财神汇彩票计划群